-
FlexAdvantage℠ – How to Use Teamviewer (Windows)
This document describes how to install and configure Teamviewer for Windows to enable a FlexAdvantage℠ – Remote Support session.
-
Maestro C Microphone Interfacing Guide
The Maestro C Microphone Interfacing Guide describes how to connect specific microphones to the Maestro C. There is a microphone...
-
SmartSDR USB Cable Interface Guide
This document describes the SmartSDR USB Cable Interface feature that allows band data to be passed to third-party hardware such...
-
A Beginner’s Guide to Remote HF Station Components
This document by Michael Walker VA3MW is intended as an introductory how-to guide for users interested in setting up a...
-
FLEX-6400(M) (with ATU) Extended Transmit Module Installation Guide
This is the step-by-step guide for installing the Extended Transmit Module in the FLEX-6400 and FLEX-6600M that has an ATU...
-
FLEX-6400(M) (no ATU) Extended Transmit Module Installation Guide
This is the step-by-step guide for installing the Extended Transmit Module in the FLEX-6400 and FLEX-6600M that does not have...
-
FLEX-6600(M) and FLEX-6400(M) SD Card Replacement Procedure
This procedure outlines the necessary steps to replace the MicroSD card in a FLEX-6600, FLEX-6600M, FLEX-6400, or FLEX-6400M Signature Series...
-
FLEX-6300 SD Card Replacement Procedure
This procedure outlines the necessary steps to replace the MicroSD card in a FLEX-6300 Signature Series software defined radio.
-
FLEX-6700 and FLEX-6500 SD Card Replacement Procedure
This procedure outlines the necessary steps to replace the MicroSD card in a FLEX-6700 or FLEX-6500 Signature Series software defined...
-
Power Genius Rack Mount Kit Installation Guide
This installation guide describes how to install the PGXL Rack Mount kit. This kit allows you to properly install the...
-
ARRL FMT Technique with FLEX-6000 Series Radios
This document by Ron Panetta, WB2WGH describes in great detail how to use a FLEX-6000 software defined radio to participate...
-
How to Guide FT8 Setup with WSJT-X
This document by Michael Walker VA3MW is intended as a how-to for users to configure SmartSDR, DAX and CAT to...
-
FLEX-6600(M) Extended Transmit Module Installation Guide
This is the step-by-step guide for installing the Extended Transmit Module module in the FLEX-6600 and FLEX-6600M software defined radios.
-
FLEX-5000 ATU Installation Guide
This is the FLEX-5000 ATU Installation Guide.
-
FLEX-5000 RX2 Installation Guide
This is the FLEX-5000 RX2 Installation Guide.
-
Maestro Tilt Hinged Feet Installation Guide
This is the step-by-step guide for installing the constant torque tilt hinged feet for Maestro
-
FLEX-6500 and FLEX-6700 Handle Installation Guide
This is the step-by-step guide for installing the front facing handle kit on the FLEX-6500 and FLEX-6700 software defined radios.
-
FLEX-6500 and FLEX-6700 GPSDO Installation Guide
This is the step-by-step guide for installing the GPSDO module in the FLEX-6500 and FLEX-6700 software defined radios.
-
FLEX-6300 Handle Installation Guide
This is the step-by-step guide for installing the front facing handle kit on a FLEX-6300.
-
Maestro Fixed Angle Stand Installation Guide
This is the step-by-step guide for installing the fixed angle stand for Maestro.
-
SmartSDR Profiles How To Guide
This document describes the SmartSDR USB Profiles feature and uses which allows the user to configure a FLEX-6000 for specific...
-
FLEX-6000 RTTY configuration with N1MM+
This configuration guide describes how to configure the FLEX-6000 for RTTY operation using N1MM+.
-
FLEX-6700 SO2R configuration with N1MM+
This configuration guide describes how to set up the FLEX-6700 for SO2R operation using N1MM+. This is also applicable to...
-
FLEX-6400 and FLEX-6600 Rack Mount Installation Guide
This is the step-by-step guide for installing the rack mount bracket kit on the FLEX-6400 and FLEX-6600 software defined radios.
-
FLEX-6400(M) and FLEX-6600(M) GPSDO Installation Guide
This is the step-by-step guide for installing the GPSDO modules in the FLEX-6400, FLEX-6400M, FLEX-6600 and FLEX-6600M software defined radios.
-
FLEX-6400(M) ATU Installation Guide
This is the step-by-step guide for installing the ATU module in the FLEX-6400 and FLEX-6400M software defined radios.
-
FLEX-6300 ATU Installation Guide
This is the step-by-step guide for installing the ATU module in a FLEX-6300.
-
FLEX-6500 and FLEX-6700 Rack Mount Bracket Installation Guide
This is the step-by-step guide for installing the rack mount bracket kit on the FLEX-6500 and FLEX-6700 software defined radios.
-
FreeDV Waveform How To Guide
The FreeDV Waveform How-To Guide describes the basic operation of the FreeDV (FDV) mode based on CODEC2 that can be...
-
FreeDV Waveform
The FreeDV Waveform Installer adds the FreeDV mode to FLEX-6000 Signature Series SDRs – FreeDV is a free, open source,...