-
Setting up CW Skimmer!
Setting up the key parts of both SliceMaster and to have it automatically start CW Skimmer. CW Skimmer: http://dxatlas.com/cwskimmer/ SliceMaster:...
-
FlexRadio Power Genius XL Initial User Setup
For new users on how to configure your Power Genius XL from FlexRadio and 403A. If you have a PGXL...
-
Setting up my First HF Remote Station
QSO Today Expo from March 2021 – VA3MW walks through the first steps of building a remote HF station and...
-
Flex 6000 Receiver Tuning – How the AGC-T works
Video Transcript This video’s full transcript has been provided below for your convenience. Hi, my name is Tim Ellison. I’m W4TME,...
-
In Depth – DAX and CAT for digital programs
An in-depth walkthrough on CAT and DAX and how you can use them to many other programs.
-
RTTY + N1MM setup for CQ WW WPX 2021
A walkthrough on setting up your 6000 series radio to work with N1MM (with MMTTY)
-
FlexRadio SmartSDR with CAT + DAX + FLDigi
An overview on how to use SmartSDR CAT and DAX to connect to your favorite program.
-
Intro to NodeRed – for the new user
We discuss the very beginning and how to get started in NodeRed for some simple station remote control You can...
-
Meteor Scatter
How does Meteor Scatter work using WSJTx. We go over how to get started, procedures and what it sounds and...
-
Using the USB port on the back of the 6000 series radios
The USB ports on the back of the radio are used to control external RS232 devices and non RS232 devices.
-
Configuring your Transverter!
The overview on Transverters and how they interface to a FlexRadio 6000
-
FRStack & GridTracker how to chase DX and grids
JP and I discuss FRStack and GridTracker. Gridtracker https://gridtracker.org/ FRStack http://www.mkcmsoftware.com/Flex/Index
-
Configuring N1MM+ to work with SmartSDR
How to set up SmartSDR and N1MM+ together for a SO1V station.
-
Introduction FlexRadio Home LAN Networking
Dan and I are going to go over the basics of the LAN (Network) required for a FlexRadio installation.
-
How we deal with Lightning (Static Crashes) and Tracking Notch Filters
How a FlexRadio with SmartSDR sounds during low band static crashes. You can see how the AGC functions and allows...
-
FlexRadio and AGC-T
Tim talks to us about AGC-T and how powerful it is.
-
Understanding FlexRadio’s S-meter readings
Video Transcript This video’s full transcript has been provided below for your convenience. Mike — Three two. Okay. We are live....
-
Microphone Connections and Setup
Video Transcript This video’s full transcript has been provided below for your convenience. Good day, it’s Mike from FlexRadio and this...
-
Mike’s FlexRadio remote HF Station
A walkthrough of my remote setup.
-
Introduction to SmartSDR for iOS
Welcome to SmartSDR for iOS written by Marcus DL8MRE. This is an introduction video that allows you full control and...
-
Flex 6000 radio and FRStack
An overview of FRStack by Mark W3II. Yet another handing external program that works well with SmartSDR and Flex 6000...
-
How to apply SmartSDR Maintenance updates
This video walks you through the process of updating the SmartSDR software on your Flex 6000 series radio by using...
-
How to update SmartSDR from an older version to a new version
This describes the process for updating your Flex 6000 radio to a complete new version, such as V1 or V2...
-
SmartSDR CAT & DAX – in depth
Video Transcript This video’s full transcript has been provided below for your convenience. Today I want to talk about SmartSDR and...
-
SmartSDR with multiFLEX Installation
How to upgrade your SmartSDR to V3 with multiFLEX. Make sure you backup your profiles using an earlier version of...
-
How to use your friends Flex 6000 Series radio – remotely
Video Transcript This video’s full transcript has been provided below for your convenience. Mike — Hey, good day. It’s Mike at...
-
SliceMaster and WSJTx for FT8 and other modes
Video Transcript This video’s full transcript has been provided below for your convenience. Good day, it’s Mike from FlexRadio, and we’re...
-
Introductory SmartLink setup
Introductory setup for SmartLink that will allow you to use SmartSDR and other devices remotely. Please post any questions of...
-
PEN Thermal Enhancement Kit Installation
This video demonstrates how to perform the thermal enhancement for the FLEX-6400, FLEX-6400M, FLEX-6600 and FLEX-6600M.