-
SmartSDR USB Cable Interface Guide
This document describes the SmartSDR USB Cable Interface feature that allows band data to be passed to third-party hardware such...
-
FlexRadio products and HF radio performance
Rod VA3ON joins Mike to discuss the FlexRadio HF architecture for the new HF operator. Video transcript An edited version...
-
HF Remote – Why a PC at the remote end?
Mike VA3MW explains the power of having a PC installed with the HF radio at the antenna site for today’s...
-
Are you getting all you can out of your HF Station
Mike is joined by Lou N2TU to talk about your HF station and getting all you can from it, including...
-
Can your HF radio do this? FT8 and FT4 at the same time on different frequencies.
Mike shows how any FlexRadio 6000 series can do 2 copies of FT8 or any 2 digital modes at the...
-
FlexRadio Tuner Genius XL – Quick Start Video
Dave, WO2X takes you on a tour of the Tuner Genius XL quick start overview. The TGXL is a legal...
-
FlexRadio HF SDR as a Platform QSO Today
QSO Today Expo – N5AC discusses the SDR technology as a radio platform.
-
Setting up my First HF Remote Station
QSO Today Expo from March 2021 – VA3MW walks through the first steps of building a remote HF station and...
-
Flex 6000 Receiver Tuning – How the AGC-T works
Video Transcript This video’s full transcript has been provided below for your convenience. Hi, my name is Tim Ellison. I’m W4TME,...
-
Introduction FlexRadio Home LAN Networking
Dan and I are going to go over the basics of the LAN (Network) required for a FlexRadio installation.
-
SmartSDR and how to connect my HF Amplifier
How to interface my HF amplifier to my Flex 6000 series radio. -Mike VA3MW
-
FlexRadio and AGC-T
Tim talks to us about AGC-T and how powerful it is.
-
Understanding FlexRadio’s S-meter readings
Video Transcript This video’s full transcript has been provided below for your convenience. Mike — Three two. Okay. We are live....
-
SmartSDR CAT & DAX – in depth
Video Transcript This video’s full transcript has been provided below for your convenience. Today I want to talk about SmartSDR and...
-
SmartSDR with multiFLEX Installation
How to upgrade your SmartSDR to V3 with multiFLEX. Make sure you backup your profiles using an earlier version of...
-
How to use your friends Flex 6000 Series radio – remotely
Video Transcript This video’s full transcript has been provided below for your convenience. Mike — Hey, good day. It’s Mike at...
-
Introductory SmartLink setup
Introductory setup for SmartLink that will allow you to use SmartSDR and other devices remotely. Please post any questions of...