- WiFi: Dual-band 2x2 802.11a/b/g/n
- Ethernet: 10/100 Mbps
- Bluetooth®: Version 4.0
- Microphone 1: Pseudo-balanced 8-pin RJ-45, dynamic or electret compatible (Same “Yaesu type” pinout as FLEX-1500 and FLEX-3000)
- Microphone 2: Pseudo-balanced ⅛” (3.5mm) TRS, dynamic or electret compatible
- Microphone Impedance: 600 Ohms Nominal (200-10kΩ)
- Headphone: Stereo headphone jack, 1/8″ (3.5mm) TRS
- Headphone Impedance: 16 Ohm at 25 mW, 32 Ohms at 13 mW with THD+N: 0.02%
- Speaker: Internal 2W mono speaker
- Powered Speaker Output: Stereo consumer line level or powered speaker output, 1/8″ (3.5mm) TRS
- Line Output: Stereo consumer line level or powered speaker output, 1/8″ (3.5mm) TRS
- Line Out/Powered Speaker Output Impedance: 600 Ohm, stereo unbalanced
- Line Input: Pseudo-balanced Line in jack, 1/8″ (3.5mm) TRS
- Line In, Impedance Level: >20k Ohm
- Key/Paddle Input: 1/8″ (3.5mm) TRS
- PTT Input: 1/8″ (3.5mm) TS
- DC Power Connector: Coaxial DC power connector, 2.1mm (AC power supply and power cable included)
- Display Type: Large 8.0″ In Plane Switching (IPS) display with 10-point touch
- Display Resolution: HD (WXGA 1280 x 800) display resolution
- Power: 10-15 VDC
- AC Power Supply: AC adapter with cord (included)
- Battery: Optional Lithium-ion battery (see requirements below)
- Stand: Standard included 30 degree tilt desk stand for optimal viewing
- Feet: Optional removable constant torque tilt hinge feet
- Display Mounting: Optional VESA MIS (100mm)
- RAM® Mount: Optional mounts available
- Height:1 6.75" (17.1 cm)
- Width:1 14" (35.6 cm)
- Dept:1 1.75" (4.5 cm)
- Weight: Approximately 4 lbs. (1.8 kgs)
- Maximum Battery Size: 3"W (7.62 cm) x 6"L (15.24 cm) x 0.75"D (1.91 cm)
- Power Connector: USB-A female
- Recommended Current Supply: 2.5A at 5V DC output
- Auto Start: Preferred feature - initiate start on introduction of a load
- Tilt hinge feet (constant torque)
- Spare Wall mount AC adapter (US & International)
- Spare DC power cable with 2.1mm barrel connector and pigtails
- FlexRadio FHM-1 hand mic with RJ45 connector
- Mic conversion cable for FMH-1-8P (8-pin Foster) to RJ45
- Stylish FlexRadio branded soft side canvas travel case
Specifications subject to change without notice.
1Without tilt hinge feet or fixed tilt stand attached
What is Maestro?
Maestro is a completely new type of control console for the FLEX-6000 Signature Series transceivers. It is a plug-and-play solution designed for optimal workflow in a small, lightweight, wired or wireless package. Just turn it on and play radio from anywhere within your home network. With the future SmartSDR v2.0 release, you will even be able to use Maestro to access your station over the Internet.
Is Maestro an amateur radio?
No. Maestro is a station control console for the FLEX-6000 series that is designed to work either with the FLEX-6300, FLEX-6500, FLEX-6700 or FLEX-6700R radios. All FLEX-6000 Series radios function as SDR-servers. Maestro is an SDR-client device that provides total control of the SDR-server over Internet protocol just as SmartSDR does running on a PC.
Which radios can be used with Maestro?
Maestro works with all radios in the FLEX-6000 Signature Series family.
Can I use Maestro with a FLEX-1500, FLEX-3000 or FLEX-5000?
No. These radios use a totally different architecture from the FLEX-6000 Series radios and are not upward compatible with Maestro.
Does Maestro require a PC in order to operate?
No. Maestro is a complete control unit that removes the need for a dedicated PC. Think of Maestro as an SDR-Client with physical controls like knobs, buttons, and LED indicators as well as an HD touch spectral display.
Will Maestro operate remotely over my LAN?
Yes. Maestro provides both wired Ethernet and Wi-Fi support that allows you to operate anywhere within your local area network. This could be in your shack, in the living room, or out on the patio.
Will Maestro work remote over a WAN?
Yes. This feature will be supported with SmartSDR version 2.0 for the FLEX-6000 Signature Series.
Can I use Maestro to drive SmartSDR on a PC?
Yes. This option will be available in a future software release. It will allow full-size spectral displays (panadapters) to be rendered on the PC screen while Maestro provides extended touch controls in place of panadapters on its display. The SmartSDR for Windows control mode will be mutually exclusive with panadapter and slice display on Maestro.
Can I use more than one Maestro to control a single radio?
Not initially. This is currently planned for a future software release.
Can I use the panadapters on both a PC and Maestro at the same time?
Not initially. This is currently planned for a future software release.
Can I use it mobile?
We have not done testing in a mobile environment. However, Maestro can be directly wired over Ethernet to any FLEX-6000 radio powered from a car battery in the control surface mode. This is an “at your own risk” use case and FlexRadio Systems or its affiliates are not liable for any accidents or incidents that may occur while operating while in this environment.
Does Maestro have LTE or 3G connectivity?
No. Maestro has dual band Wi-Fi and wired Ethernet connectivity.
Can I connect Bluetooth devices, like headsets, keyboards, speakers, etc. to Maestro?
Bluetooth device support on Maestro is still being tested. This feature may or may not be enabled on the initial release of the product. Once Bluetooth connectivity is supported we will carry recommended and tested accessory devices in the on-line store .
Will you be able to re-assign functions to the small knobs and function keys?
The function keys will be assignable but the knobs are all dedicated to their defined functions.
Will Maestro have a USB port for adding a USB headset?
No. Maestro does not support external USB devices.
Will Maestro have support for Bluetooth peripherals such as a keyboard, mouse or headset?
Yes. We plan to qualify and offer Bluetooth peripherals. The exact products and timing are yet to be determined.
Will QSK be supported for paddles connected to the key jack?
In the initial product, Maestro will work with non-QSK CW only. Future software releases may support QSK CW.
How does Maestro integrate with logging programs?
Logging programs will integrate with the FLEX-6000 through either SmartSDR CAT (installed with SmartSDR for Windows on the PC you will use for logging) or the SmartSDR API (which may be used on any computer including OS X, Linux, Windows or other operating systems). For PC loggers, you will need to install SmartSDR CAT on the PC to provide digital communication between the logging program and the FLEX-6X00. Both Maestro and SmartSDR CAT operate as clients to the FLEX-6X00.
How do I operate digital modes using Maestro?
Digital modes may interface to the SmartSDR DAX program (installed with SmartSDR for Windows on your PC), through the direct digital interfaces in the radio using the SmartSDR API or using Line-In and Line-Out on Maestro. DAX provides a digital communications channel directly between the digital mode software and your FLEX-6X00.
Can I attach an external display to Maestro?
No. Maestro does not support an external monitor connection.
How is software licensing handled on Maestro?
Maestro software licensing is tied to each individual FLEX-6000 radio and will track software licensing of the radio to which it is connected. There is no separate software license fee for Maestro.
How is the SmartSDR for Maestro software updated and does it require a PC to support the update?
Maestro will check the Internet for software updates automatically. When updates are detected, Maestro will offer updates which may be installed at that time or postponed to a later date. Multiple version of SmartSDR for Maestro will be stored to allow for conveniently running a previous software version.
What standard items are items are included with Maestro?
Included with the Maestro are the following standard items:
- A 30 degree tilt desk stand
- One 6 foot DC power power cable with 2.5mm coaxial power connector and pigtails
- An AC power supply
- One 7 foot Ethernet CAT5 cable
- One 1/4 inch TRS jack to 1/8 inch TRS plug adapter
- Maestro Quick Start Guide
What does it cost?
The MSRP for Maestro is $1199.00 USD.
What is the hardware warranty for Maestro?
We provide a 1-year limited warranty with each unit purchased. Details are on the Maestro product web page.
Can I buy an extended warranty or damage insurance?
We are currently not offering insurance or extended warranty. Please let us know if you would be interested in purchasing such insurance or warranty options if it were offered.
Is there a money back guarantee?
No. However, you can return the Maestro within 14 days of shipment with payment of a 15% restocking fee.
Maestro 1-Year Limited Hardware Warranty
This Limited Warranty is effective as of the date of first purchase by the consumer. Original equipment hardware warranties and manufacturer support for FlexRadio Systems products applies only to the original purchaser and are not transferable unless a Warranty Transfer agreement is purchased from FlexRadio Systems. Before sending in your product for service, it is recommended that you query the FlexRadio Community to make sure your issue is not easily resolved. If you still have an issue, submit a request for support via the FlexRadio HelpDesk. Once you are assigned a incident or ticket number, one of our Technical Support Engineers will determine if the issue your product is experiencing requires service or repair and will either issue you an RMA (Return Material Authorization) number for service in Austin, TX or refer you to another authorized Service Center. Any product returned for service that is out of warranty or has had its warranty voided is subject to a one (1) hour diagnostic bench charge. This charge will be applied to any work performed.
What is Covered:
During the first thirty (30) days after the date of shipment, FlexRadio Systems will fully repair or replace defective product at their discretion. For the remaining one (1) year after the date of shipment, FlexRadio Systems will replace defective parts free of charge (post-paid). Any replacement hardware parts will be warranted for the remainder of the original warranty period or ninety (90) calendar days from the date of installation or repair, whichever is longer. FlexRadio Systems will also correct any failure caused by defective parts and materials. You must send the unit at your expense to FlexRadio Systems. FlexRadio Systems will pay return shipping to the country of purchase.
What is Not Covered:
This Limited Warranty as it pertains to the active components does not cover repair or damage caused by (1) misuse, negligence or user modifications; (2) any performance malfunctions involving non-FlexRadio Systems accessory equipment; (3) connection to improper or unstable voltage supply; (4) the incorrect installation of any and all cables connected to the radio by the user; (5) damage resulting from the use of faulty battery packs and/or external power supplies; (6) the use of third-party software applications or hardware that directly or indirectly controls Maestro functions and/or operating state by utilizing a communication or control protocol; (7) any physical damage incurred due to drops or mishandling or (8) random acts of nature such as flood, fire, water, weather related storm, lightning or electrostatic discharge damage.
Limitation of Incidental or Consequential Damages:
This warranty does not extend to non-FlexRadio Systems equipment or components used in conjunction with our products. Any such repair or replacement is the responsibility of the customer. FlexRadio Systems shall not be liable or responsible for reimbursement for any special, indirect, incidental or consequential damages, including but not limited to any loss of business or profits, loss of property, loss of revenue, loss of use, loss of data, inconvenience or cost of unauthorized service.