All Flex Insider

Flex Insider November 2026

Welcome to the November 2026 Flex Insider!


How a FlexRadio Is Built, and Why

CTO Update, November 2026

A lot of new owners have joined the FlexRadio family this year, and many more hams are taking a close look at what we build. Whether you’re coming from a traditional superheterodyne transceiver or from another SDR, it’s natural to assume all software defined radios are about the same inside. They aren’t. This month I want to explain how a FlexRadio is built and why we built it that way.

We made these choices with a clean sheet of paper for the FLEX-6000 Signature Series, and everything below also applies to the FLEX-8000 series and Aurora radios. Plenty of current transceivers are direct sampling too, so the first few sections cover what direct sampling gives you over a superhet, and the rest cover where a FlexRadio is different from other SDRs.

Why Direct Sampling

A superhet converts your signal to an intermediate frequency through one or more mixers, each driven by its own local oscillator. Mixers are nonlinear by design. When strong signals are present, they create intermodulation (IMD) products that can land right on top of the weak signal you’re trying to copy. Every local oscillator also adds its own phase noise and spurs.

To finish reading the story, go here: How a FlexRadio Is Built, and Why

Introducing the Aurora Series

One Platform, Eight Radios

FlexRadio’s current lineup has two families: the FLEX-8000 series, launched in 2024 and now shipping, and the new Aurora series, introduced in 2025. All eight radios run the current SmartSDR. They also share SmartLink remote operation, MultiFlex, built-in GNSS GPS, Controlled Envelope SSB, full-duplex receive and an optional GPSDO with a 10 MHz reference output.

Each family comes as a server-style radio that you run from a PC, laptop or Maestro, or as an “M” model. The M models add a Maestro front panel with an 8-inch display, a built-in speaker and HDMI output, and you can still control them externally. Whichever you pick, you get the SmartSDR experience on a front panel or across the internet.

FLEX-8000 Series

These are 100-watt radios for HF and 6 m that run on 13.8 V DC. The FLEX-8400 and FLEX-8400M give you two receivers (slices), one Spectral Capture Unit, a 122.88 Msps ADC and a 7 MHz waterfall, with an ATU available as an option. The FLEX-8600 and FLEX-8600M are for contesters and DXers. They have four slices, two Spectral Capture Units, 7th-order bandpass filters, a 245.76 Msps ADC and a 14 MHz waterfall, plus diversity reception and full SO2R. They also have a built-in ATU and two receive-only antenna ports. Every 8000-series radio supports adaptive predistortion.

Aurora Series

Aurora builds the amplifier into the radio: 500 W on HF and 200 W on 6 m, running directly from 80–260 VAC mains. Every Aurora also has an ATU, adaptive predistortion and SmartSDR. The AU-510 and AU-510M have the same receiver as the 8400: two slices, one Spectral Capture Unit, a 122.88 Msps ADC and a 7 MHz waterfall. The AU-520 and AU-520M match the 8600 on the receive side, with four slices, two Spectral Capture Units, 7th-order filters, a 14 MHz waterfall, diversity, full SO2R, two receive-only antenna ports and two transverter ports.

With Aurora, a full station is one box: a high-performance SDR and its amplifier, plus an optional Maestro-style front panel.


A Remote HF Station at the Base of the Tower

Mike, VA3MW, has put together an excellent overview of his remote HF station: the whole station cleanly packaged and installed at the base of the tower.

VA3MW remote HF station at the base of the tower

Does My SmartSDR+ License Cover v4.3?

We’re often asked when a SmartSDR+ license expires, and whether it includes the features in the latest release, v4.3. Your radio will tell you.

In SmartSDR, open Radio Setup and stay on the Radio tab. Under License Info, look at the Expiration date.

SmartSDR Radio Setup License Info panel

You are licensed for new features as they are released, up to your expiration date. For v4.3, that means an expiration date of 2026-10-13 or later.

Features never expire and stay with the radio hardware.

If your date is earlier, use Get SmartSDR+ in the same panel to renew your SmartSDR+ license.


Thanksgiving Holiday Hours

FlexRadio will be closed for the Thanksgiving holiday, and we’ll be running with limited staff in the days before it. Here’s what to expect:

  • Mon Nov 23 – Wed Nov 25: Limited staff
  • Thu Nov 26 – Fri Nov 27: Closed

Responses may take a little longer than usual during that week, and we’ll be back at full strength on Monday, November 30.

From all of us at FlexRadio, happy Thanksgiving. We hope you get some time with family and friends, and some time on the air. Enjoy the hobby!


HelpDesk Highlights: New to FlexRadio, or Just Need a Refresher?

Whether you’ve just unboxed your first radio or have been on the air with a FLEX for years, our HelpDesk is full of reference material written to make setup and day-to-day operation easier. This month, we’re highlighting four articles that are especially helpful for new owners, and worth a second look for experienced users too.

If you’re setting up a new station, start with the basics of getting your radio onto your network. If you’ve picked up an Aurora, our guide for new owners covers what’s different from earlier FlexRadio models. And if you’re moving to the latest SmartSDR release, with its revamped DAXv2, two articles walk you through what has changed and how to get your digital programs working again.

Even if you’re a longtime user, these are worth bookmarking. A quick refresher can save time, and the HelpDesk is always there when you need a straight answer.


Free Club Presentations: Bring FlexRadio to Your Club

We have two unique and engaging talks that we are excited to deliver to your club members. Each presentation is delivered live (online) by Mike, VA3MW, directly to your group. No travel required, no cost to your club.

1. Aurora 500-Watt Transceiver

Mike covers the new Aurora HF Series. A platform that integrates a high-efficiency 500W transmitter, amplifier, tuner, and power supply into a single compact unit. Learn how Aurora delivers reduced heat, lower power input, and full network control while keeping the familiar operating experience FlexRadio users appreciate. A big step forward in the evolution of HF/6m transceivers.

2. Not Your Dad’s HF Radio (Most Popular)

Our most requested presentation. This talk explores the differences between traditional HF radio using Superheterodyne Receivers and today’s Software Defined Radios, showcasing the real-world advantages of modern SDR technology. A perfect introduction for clubs with mixed experience levels.

Ready to schedule? Send us your preferred dates and times and the talk you are interested in, and we will get it on the calendar for the coming season.


Contact Us

If you need to reach out to us, you can find us at:

By using this website you agree to our updated Conditions of Use and consent to the collection and use of your personal information as described in our updated Privacy Notice, which includes the categories of data we collect and information about your preferences and rights.

Accept

Pay Over Time

To use Bread, please add products to your cart and follow the prompts for checkout — then select the “Bread” option in your checkout’s Payment section. Follow the prompts to submit your application. Check out now →

Bread Pay™ is a simple way to buy the products you want now and pay over time at your favorite online stores.

Apply for financing in seconds without ever leaving our site! Make easy online payments using our member portal or sign up for auto-pay for worry-free payments. You also have the flexibility to pay off your loan at any time with no penalty.

Paying over time through Bread Pay™ is quick, easy, and transparent. Learn more about how it works →

If your items are already in your cart, feel free to check out now and start the process!

*Availability of terms may vary based on purchase price and/or product. Down payment may be required. Subject to approval of credit application. Rates range from 0% to 29.99% APR, resulting in, for example, 24 monthly payments of $46.14 at 9.99% APR, per $1,000 borrowed. APRs will vary depending on credit qualifications, loan amount, and term. Bread Pay™ loans are made by Comenity Capital Bank, a Bread Financial™ company.

**Availability of terms may vary based on purchase price and/or product. Down payment may be required. Example payment is based on the listed product prices assuming a 24 month term loan and a 9.99% APR. Subject to approval of credit application. Rates range from 0% to 29.99% APR. APRs will vary depending on credit qualifications, loan amount, and term. Bread Pay™ loans are made by Comenity Capital Bank, a Bread Financial™ company.