Parent cat for global SSDR-Win downloads
This document describes the SmartSDR USB Profiles feature and uses which allows the user to configure a FLEX-6000 for specific operating configurations and quickly recall those configurations using global, transmit and microphone profiles.
This document describes the SmartSDR USB Cable Interface feature that allows band data to be passed to third-party hardware such as amplifiers, antenna controllers, and tuners via USB to Serial cables connected to the USB ports on the back panel of a FLEX-6000. Signals generated by SmartSDR appear on the cable in a form acceptable [...]
This Quick Start Guide describes how to install a FlexControl for use with SmartSDR for Windows. The configuration of the FlexControl is described in the SmartSDR Software User Guide.
The NapoliSerial Xlight Regular True Type font is used by SmartSDR for Windows application. This font is installed as part of the SmartSDR for Windows installation. The application font is provided in the event the font requires manual installation.
A description of the SmartSDR Waveform API used for adding and integrating modulation/demodulation modes directly into SmartSDR. This datasheet describes the following available Waveforms: Codec2 (FreeDV) D-STAR®
The D-STAR® Waveform How-To Guide describes the basic operation of the ThumbDV™ D-STAR (DSTR) mode that can be added to any FLEX-6000 Signature Series software defined radio. Note: The D-STAR waveform requires an NW Digital Radio ThumbDV (DV3000U) USB device that is plugged into the USB port on the back of the FLEX-6000 to provide [...]
The ThumbDV D-STAR Waveform Installer adds the D-Star mode to FLEX-6000 Signature Series SDRs - D-Star digital voice and data protocol specification for HF and VHF+ amateur radio, developed by the Japan Amateur Radio League (JARL). D-Star uses frequency-division multiple access and minimum-shift keying in its packet-based standard. NOTE: To utilize D-Star with the FLEX-6000 [...]