How To Guides for SmartSDR for Windows

SmartSDR Profiles How To Guide

2018-08-17T08:22:14+00:00August 6th, 2018|

This document describes the SmartSDR USB Profiles feature and uses which allows the user to configure a FLEX-6000 for specific operating configurations and quickly recall those configurations using global, transmit and microphone profiles.

SmartSDR USB Cable Interface Guide

2018-08-06T15:00:13+00:00August 6th, 2018|

This document describes the SmartSDR USB Cable Interface feature that allows band data to be passed to third-party hardware such as amplifiers, antenna controllers, and tuners via USB to Serial cables connected to the USB ports on the back panel of a FLEX-6000. Signals generated by SmartSDR appear on the cable in a form acceptable [...]

D-STAR Waveform How To Guide

2018-08-08T22:40:48+00:00August 5th, 2018|

The D-STAR® Waveform How-To Guide describes the basic operation of the ThumbDV™ D-STAR (DSTR) mode that can be added to any FLEX-6000 Signature Series software defined radio. Note: The D-STAR waveform requires an NW Digital Radio ThumbDV (DV3000U) USB device that is plugged into the USB port on the back of the FLEX-6000 to provide [...]

FreeDV Waveform How To Guide

2018-08-08T22:41:45+00:00August 5th, 2018|

The FreeDV Waveform How-To Guide describes the basic operation of the FreeDV (FDV) mode based on CODEC2 that can be added to any FLEX-6000 Signature Series software defined radio.