-
USB to Serial adapter for the FLEX-6000 series
This genuine FTDI interface cable plugs into the USB port on the back of the FLEX-6000 series radios to connect...
-
Warranty Transfer
Purchasing the warranty transfer will transfer the remainder of the original warranty period of a FLEX-6000 SDR, Maestro, Power Genius...
-
USB to Parallel adapter for the FLEX-6000 series
This genuine FTDI interface cable plugs into the USB port on the back of the FLEX-6000 series radios to connect...
-
Replacement GPSDO Antenna
The GPSDO replacement antenna is a low-profile “puck” style GPS antenna with an integrated 26 dB gain preamplifier. The antenna...
-
Replacement shipping box
Replacement shipping box for FlexRadio.
-
RCA Plug to 1/4in (6.35mm) TS Mono Jack Adapter, Gold Plated
This adapter is used to convert a 1/4 inch TRS Mono to RCA primarily for PTT input on the FLEX-6X00...
-
Radiosport PTT Hand switch with RCA plug
A high-quality powder coat finish dual action handheld PTT switch with a 7 foot fiber reinforced cable and RCA phono...
-
Radiosport Pillow Top Headband
Replacement FlexRadio-branded soft pillow-top headband cover.
-
Radiosport Cloth Ear Cover Set
Replacement cloth ear cover set that slips over the gel ear cushions.
-
Radiosport Headset cable – 3-pin XLR
This is the high-quality headset-to-radio cables for connecting the RS60CF boom-mic headset to any of our software defined radios that...
-
Radiosport Headset cable – 8-pin Foster
This is the high-quality headset-to-radio cables for connecting the RS60CF boom-mic headset to any of our software defined radios that...
-
Rack Mount for FLEX-6500 and FLEX-6700
Black anodized aluminum Rack Mount for FLEX-6500 and FLEX-6700 (Not installed at factory)
-
Radiosport Boom Mic Windsock
Replacement foam microphone windsock for all boom mics.
-
Rack Mount for FLEX-6400(M) and FLEX-6600(M)
Black anodized aluminum Rack Mount for Flex 6400(M) and Flex 6600(M) (Not installed at Factory). These fit both M and...
-
Pre-owned Tilt Hinge Feet for Maestro
Our FlexFlea market includeds products that were used at trade shows or received in on trades. Items are sold as...
-
Power Cable for FLEX-6000
Power Cable for FLEX-6000.
-
Powerwerx 30 Amp Desktop DC Power Supply with Powerpole Connectors
This small regulated switching power supply features 2 Powerpole outputs in front and 1/4″ binding posts in rear. Machined metal...
-
OBI-FLEX-6300 Handle Kit
OBI Signature Series Handles for the FLEX-6300 (Not installed at factory)
-
Microphone cable RJ-45 to 8 pin foster
Coiled mic cable with RJ-45 — 8 pin foster connection 6 feet when fully stretched For FHM-1 and FMH-2’s.
-
INRAD M-YM RJ-45 Adapter
INRAD series M-YM adapter for RJ-45 modular jack transceivers. Use this rig mic jack adapter with the cable supplied with...
-
INRAD M-Y 8-Pin Foster Adapter
INRAD series M-Y adapter for transceivers with an 8-pin Foster connector. Use this adapter with the cable supplied with INRAD...
-
INRAD M-650 microphone
M650 is the M Series counterpart to the M629 that provides well articulated overall audio with overall higher-end output punch...
-
INRAD M-F cable for 3.5mm FLEX-6400(M)/6600(M)
INRAD series M-F cable for3.5mm stereo (TRS) mic jack FlexRadio 6400(M)/6600(M) transceivers. Use this cable instead of the cable supplied...
-
INRAD M-629 microphone
The INRAD M629 is a wide frequency range, unidirectional cardioid dynamic microphone ideally suited for rag chewing and ESSB. It...
-
INRAD DM-YM RJ 45 detachable cable
INRAD DM-YM detachable coiled cable for DMS-1 base. 4 pin XLR female to RJ-45 modular for FlexRadio mic jack.
-
INRAD DM-F 3.5mm TRS + RCA Cable
INRAD DM-F detachable coiled cable for DMS-1 base. It is a 4-pin XLR female to 3.5mm stereo (TRS) mic jack...
-
FlexRadio FLEX-6000 Ballcap – Black
Whether you are on the golf course, at the flea market or you just want to make your ham buddies...
-
FlexRadio Premium Engraved Coffee Mug
Enjoy your favorite hot beverage in a stylish 18 oz. stainless steal coffee mug with the FlexRadio logo engraved on...
-
FLEX-6400/6600 Handle Kit
Signature Series Handles for FLEX-6400, and FLEX-6600 (Not installed at factory). These only fit the non M models and will...
-
FLEX-6400/6600 Extended Transmit Module
The FLEX-6400/6600 Extended Transmit Module is a supplementary bandpass filter module that can be user installed in a FLEX-6400 or...
-
Certified Pre-Loved FLEX-6700 Signature Series SDR Transceiver
Certified Pre-Loved FLEX-6700 comes with a 1 year warranty and most recent version of software. The unit has been tested...
-
Certified Pre-Loved FLEX-6400M Signature Series SDR Transceiver w/ Automatic Antenna Tuner
Certified Pre-Loved FLEX-6400M radios are sold in excellent condition with a one year warranty. They have been through a full...
-
4 Pin XLR to 1/8in (3.5mm) TRS and RCA for FLEX-6400(M) or FLEX-6600(M)
This audio cable is used to connect a 4-pin XLR microphone, like the HM-Pro to the FLEX-6400(M) or FLEX-6600(M) 1/8″...